For antimicrobial testing, Yersinia ITC Broth Base Culture Media sits at the point where organism growth becomes a quantitative or categorical measurement. The discussion below connects its documented role with preparation variables, controls, interpretation, and the limits of inference. Catalogue 610369 is discussed as a laboratory measurement component; implementation should follow the laboratory SOP and validated reference method.
Analytical scope and method role
Yersinia ITC Broth Base is a selective liquid medium used with supplements for the enrichment of Yersinia enterocolitica from food, water and environmental samples, according to ISO 10273.
Method principle
Enzymatic digest of casein provides amino acids, nitrogen, carbon, minerals, for organisms growth. Yeast extract is a source of vitamins, particularly of B-group. Sodium chloride maintains the osmotic balance of the medium. Irgasan (triclosan) inhibits Gram-positive bacteria and together with magnesium chloride and malachite green make the broth highly selective. Supplementation with Yersinia ITC Supplement (ref. 81092), containing ticarcillin and potassium chlorate, increases selectivity against both Gram-positive and Gram-negative bacteria.
Formula and functional interpretation
(g/l)Enzymatic Digest of Casein10.0Yeast Extract 1.0Magnesium Chloride Anhydrous28.1*Sodium Chloride 5.0Malachite Green 0.01Irgasan 0.001Final pH 6.9 ± 0.2 at 25°C*Equivalent to 60 g of magnesium chloride hexahydrate (MgCl2 6H2O)
Review the nutritive, selective, differential, buffering, reducing, and indicator components against the expected target and background flora. Preparation errors can change recovery, inhibition, colour development, or endpoint visibility even when incubation is correct.
Preparation and execution: controlled method points
Preparation: Suspend 44.1 g of powder in one liter of deionized or distilled water. Bring to boil and shake until completely dissolved. Sterilize at 121°C for 15 minutes. Cool up to 45-50°C. Aseptically, add rehydrated content of 2 vials (10 ml) of Yersinia ITC Supplement. Dispense into appropriate containers.
Procedure: Prepare the initial suspension by adding the test sample to Yersinia ITC Broth to give a 1:100 dilution and homogenize for 2 min. Incubate at 25 ± 1°C for 40-48 h.
Translate the method into controlled worksheet fields: catalogue and lot, preparation mass or volume, water quality, pH where applicable, heating or sterilization, supplements, dispense volume, preparation date, expiry assignment, incubation atmosphere and temperature, reading window, equipment, and analyst. Record departures as deviations instead of silently normalizing them.
Quality control: what the control result protects
Challenge both sides of performance. Include a target reaction demonstrating recovery and, when relevant, a non-target or alternate reaction challenging inhibition or differentiation. Record expected and observed responses, acceptance criteria, strain and passage, lot, incubation, and disposition. A failed control blocks result interpretation until the cause is resolved.
Interpretation and confirmation pathway
Turbidity of the medium indicates microbial growth. To isolate colonies subculture to Salmonella Shigella Desoxycholate Calcium (SSDC) agar. After incubation at 30± 1°C for 18-24 hexamine the plates for suspect colonies. Final identification should be confirmed by standard biochemical tests.
Record the raw observation before the conclusion: morphology or colour, growth pattern, endpoint, reaction intensity, reading time, and control response. Presumptive reactions remain presumptive. Route atypical, weak, mixed, or delayed reactions through the confirmation step in the current method.
Storage, stability, and pre-use inspection
AND TRANSPORT CONDITIONSThe powder is very hygroscopic, store the powder at 10-30°C, in a dry environment, in its original container tightly closed and use it before the expiry date on the label or until sings of deterioration or contamination are evident. Store prepared medium at 2-8°C away from light.WARNING AND
Receipt and storage records should reconstruct temperature exposure, lot rotation, expiry, container integrity, and time outside controlled storage. Inspect colour, clarity, fill volume, gel integrity, contamination, dehydration, and precipitate before use.
Limitations and boundaries of use
The product does not contain hazardous substances in concentrations exceeding the limits set by current legislation and therefore is notclassified as dangerous. it is nevertheless recommended to consult the safety data sheet for its correct use. The product is designed for professional use only and must be used by properly trained operators.
Applicability depends on matrix, target organism, interfering flora, inoculum, validated method, and regulatory setting. Do not transfer conditions or acceptance criteria from a different matrix without verification.
Troubleshooting from evidence, not guesswork
- Poor recovery: check preparation, pH, overheating, supplement addition, inoculum, atmosphere, storage, and control performance.
- Loss of selectivity: review formulation, sterilization, expiry, inoculum burden, enrichment sequence, and incubation time.
- Weak or atypical reaction: confirm reading time and atmosphere, compare controls, document mixed growth, and follow confirmation requirements.
- Run-to-run drift: trend lot, analyst, equipment, water, preparation batch, controls, and environmental conditions.
External method context
The product should be understood as one measurement component in an antimicrobial susceptibility method. The analytical chain includes isolate purity, standardized inoculum, medium composition, antimicrobial concentration, incubation atmosphere and time, endpoint reading, and the interpretive table selected by the laboratory. A shift in any upstream variable can move an MIC or zone without a change in organism biology, which is why QC distributions and trend review are more informative than a single pass/fail control.
External laboratory-quality guidance also supports a lifecycle view: verify the method when introduced, bridge new lots against an accepted lot, trend control results, investigate nonconformities, and retain enough raw observations to reconstruct the decision. This is the practical difference between reproducing a preparation instruction and demonstrating that the resulting measurement is fit for its intended use.
FDA BAM Chapter 5: Salmonella
The current FDA BAM Salmonella workflow separates pre-enrichment, selective enrichment, selective plating, and confirmation. That sequence is scientifically important: enrichment increases target representation in a mixed matrix, selective conditions manage competing flora, and confirmation prevents a colour or colony morphology from being treated as identity. A laboratory transferring the method should verify recovery and selectivity on its own matrix classes rather than assuming that a medium performs identically across foods, water, and environmental samples. Review the authoritative source.
EUCAST disk diffusion and quality control
EUCAST requires standardized methodology, current breakpoint tables, and routine quality control; the laboratory remains responsible for the final susceptibility report. For broth dilution, inoculum density, cation content, pH, incubation atmosphere, endpoint definition, and two-fold dilution design influence MIC reproducibility. Breakpoints are interpretive rules applied after a technically valid MIC or zone measurement; they are not properties of the product alone. Review the authoritative source.
WHO Laboratory Quality Management System handbook
WHO laboratory quality guidance treats document control, equipment, purchasing and inventory, process control, records, occurrence management, and continual improvement as connected parts of reliable testing. Review the authoritative source.
Technical references
- Manufacturer product documentation for catalogue 610369.
- FDA BAM Chapter 5: Salmonella (access checked 2026-07-20).
- EUCAST disk diffusion and quality control (access checked 2026-07-20).
- WHO Laboratory Quality Management System handbook (access checked 2026-07-20).
Bench-use checklist
- Verify product identity, catalogue number, lot, expiry, and storage history.
- Document preparation and incubation exactly as controlled in the SOP.
- Define controls and acceptance criteria before testing.
- Record raw observations, control response, reading time, and confirmation decision.
- Escalate failed controls, atypical reactions, and departures through the quality system.